The SSF-SFP-SM10G from Cleerline is a 10G SFP+ Single Mode Transceiver. This 1310 nm DFB 10 Gigabit SFP+ transceiver is designed for long range transmission (up to 20km) over single mode fibers. It uses a Fabry-Perot laser transmitter at 1310nm and has a Line rate of 10.3125Gbps. The SFP accepts two LC Connectors. The SFP+ LR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.
Features:
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Compliance: MSA SFF-8431, RoHS
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0 to 70°C
- Low power consumption
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
