Note: As of June 2019, Leviton has discontinued the Omni Series panels and consoles.
Give us a call at 425.454.9900 or email us if you would like help finding the appropriate replacement products.
Flush Mount Remote Indoor Temp Sensor.
Features:
- The Flush Mount Remote Indoor Temperature Sensor may be mounted in the conditioned space and the thermostat can be mounted remotely for protection from tampering or for aesthetic reasons
- This sensor uses twisted pair, shielded cable from the Omnistat thermostat to its location
- For distances up to 100 feet, typical twisted pair, PVC-insulated, shielded cable may be used
- For distances from 100-150 feet, twisted pair with polypropylene insulated conductors, shielded must be used
- For distances from 150-250 feet, twisted pair with foam-polyethylene insulated conductors, shielded must be used
- Wire runs must not exceed 250 feet
- The Remote Sensor must be mounted in the same location appropriate for a thermostat for best performance (for example, on an inside wall, free of draft from vents, away from sunlight, windows, etc.)
- This small unit (disc is 1.5 inches in diameter) can be flush mounted in the drywall and painted over to become almost invisible in a residential installation
- This sensor will work with any Omnistat2 thermostat
